Shower and bath renovations – apparel and election
The choice of what to cover in your shower or tub walls as hard as the choice of flooring in your home. It 'a lot to choose from: natural stone, tiles, porcelain, ceramics (yes, there is a difference between porcelain, ceramic and pottery!), Artificial marbles or a piece of fiberglass or PVC Shower / Bathtub Inserts bathroom. The decision to cover the walls, ceiling, or only part of the necessary means.
When you choose a wall covering for yourShower or tub / shower combos here are some points:
Some of these decisions will be decided by other factors such as the size of the shower only a bath or shower, only one further convert or just a change in the existing style and decor. Stand-alone showers has also had the choice of what to do with the shower floor. Installing a prefabricated shower pan, a "hot MOP" shower pan, coated with PVC or other waterproof shower pan.
The prefabricated showerPan, usually PVC, you can also order a marble pots cultivated or fiberglass with an acrylic coating. These types of pots sit directly on the floor unfinished (substrate) of the shower. The only operates in more after the demo of the current shower is added to the top of the tube down. After the shower pan is in place and is secured, it is over with earth.
If you are on the tile floor shower, you have the choice, there is complete shower pan operation. A "hotMOP "tar hot shower pan on the floor mortared shower, pouring a process very smoky and smelly. This type of shower pan is not as good as the membrane shower pan in recent years, partly due to the hot mop shower pan and cause losses trend and the growth of mildew smell in the shower. The only way to free it by removing the shower pan. membrane shower pan for your mortared floor of a ship from PVC shower. They have a reputation that lasts longer shower pan ifinstalled correctly.
The decision to cover the walls to the ceiling or is a personal decision, but what must be considered. Advantages and disadvantages are simple: If the walls are only part of the way to the ceiling, there is a lip or edge of the dust and dirt collects, if the walls are completely covered to the ceiling, do not exist.
Tiles on the walls: As a new tiled shower is beautiful, regardless of the type of tiles are used, it is necessary for a rigorous maintenanceRoutine to make it beautiful. It 'necessary to wash clean (with clean water and dry throughout with soap, shampoo and conditioner) from left and wipe the tiles after each shower for a lasting beauty. For natural stones, to use all cleaning products for acceptable use of natural stone mind controlled.
Natural stone tiles are porous and moisture and chemicals. Soap, shampoo and conditioner can your tiles for a short period of boring. Mineral deposits in watercan also dull your tiles. When choosing natural stone tiles for your walls, shower, be sure and seal your tiles and the joints. Sealing of tiles and the joints do not seal or a single dose. Tile and grout sealing to prevent the tiles and the joints to absorb the chemicals that can damage the superficial lesions and included in bricks and mortar. Most suppliers and manufacturers recommend that you seal the tiles and the joints at least once a year.
Ceramic tilesStoneware and does not require sealing, but no mortar between the tiles. As with natural stone, tiles, pottery and porcelain tiles should be cleaned and dried after each shower for a long lasting shine.
As already mentioned, there is a difference between porcelain, ceramic and ceramic tile. Ceramic tiles are made of clay and has a water absorption greater than .05% of the color or design is a coating on the surface. Ceramic tiles are easily scratched or chippedand holes for the shower or tub valves Spout is easier than with ceramic.
Ceramic tiles are usually caused by the press powder (powder, quartz, clay, feldspar and other inorganic products) that a denser tile that is causing a lower water absorption. To qualify as porcelain tile, so the water is less than or equal to .05%, additional classifications in terms of strength and durability. Chinastronger than ceramic and are more difficult to chip, scratch and is exercised through a hole. Some porcelain tiles called "whole body" color bear porcelain and design of the total thickness of the tile. These are usually more expensive.
Cultured marble: In recent years, would change the color of these sheets and get dirty with proper maintenance. Heat, humidity and chemicals affect them. But today, the industry argues that this has been resolved. Cultured panels is good forinstaller, but spendy for the customer. Maintenance of cultured pearls, marble is relatively easy, since it will suppress any seams. A doctor just after the shower is more than enough. Collect case of hard water deposits can be removed with vinegar, may, in splendor, a gel-gloss again. (Recommended for brilliance maintenance once a year.) For a more detailed cleaning, be sure to use a product that is not too abrasive.
One piece fiberglass or PVC shower / bath viewers: thisin general the construction or redesign of projects for the simple reason of access. This places a piece tub / shower not go through the door of the bathroom with the door removed. Installation is relatively simple, but inconvenient. The costs can be high when a custom size you need, but for a standard size, which are relatively cheap compared to installing individual components of the tub or shower pan and install ceramic tiles of marble or cultured pearls.
When choosing a shower / vessel wallCoatings, to decide how long you are willing to pay for the maintenance of the wall after the installation may be more important than what you want for the project.
Related posts: