surfaces of ceramic tiles – Basic
ceramic tile material is relatively rigid and brittle, then a stable base is the most important part of installing this type of tile. If you like tiles, loose tiles, loose joints or broken to see, select the correct document. Liner to be what the construction industry in level between the wood subfloor and your tiles will call.
You have several alternatives for achieving the surfaces of ceramic tile needs strongInstallation.
Plywood-just a single layer of plywood is not rigid enough to stop floor deflection. It should be covered with an extra layer of exterior plywood to achieve a total thickness of at least 1 1 / 8 inch. You can (A) – Cover with a plywood board cement Backer (more on these B below) or () coverage of the existing plywood with a second layer of exterior plywood. Between these two is a thin-set mortar is used to remove air pockets. Moreover, inBathing is advisable to put a 'bath of Pan "on your background in wood. This thin rubber materials that protect tile floor moisture expansion and contraction caused by temperature and humidity.
Cement Backer Board – These are prefabricated, lightweight concrete used for the coating of wooden surfaces. Has a nucleus near Portland concrete and fiberglass surfaces on both sides and can withstand prolonged moisture. Brands include Durock,BOARD GLASCRETE UTILICRETE and wonder. Collections of cardboard Contributors should be distributed that are not directly above the joints of the wood substrate.
mortar beds of mud or mortar beds, primarily of professional tile contractors.'re a covering layer of thick felt, then the grid, followed by a layer of mortar. The reason is mainly used by experts, it requires a high degree of skill and practice to ensure the mortar bedproduces a sufficiently smooth surface. The second reason is that the earth is the best foundation for any tiles. Okay, but why? Because the mortar bed has a built-in sound for deviations in the form of wire mesh floor. Translation-less tiles cracked and loose joints, and long life pavement.
Concrete plate-
You can directly place your tiles on concrete slab, but all cracks and holes in the installation will be renewed beforeA tile if adhered to the concrete directly. to put some concrete slab carefully made at the table without being covered with crepe help. This connection, installation of tiles are removed before the mortar bond markets provide a long-term, as the substance helps retain moisture in the concrete and in some cases affects adhesiveness. It 'also important that the plate just as effectively as possible, especially with larger tile formats in use today. Clean Concretefull of dirt and dust will also contribute to a better quality of installation. In short, the preparation of the key surface.
Another option is to tile over existing floors. There are a few things to note. Is your existing floor rigid, flat, in good shape? And 'good enough to put in the background to support him? Good. If the existing floor linoleum or PVC? Not so good. You have to remove or get a good screed on top. (EBe sure to include the old vinyl flooring asbestos fibers. You do not want these things even strips. Instead, meet some or plywood subfloor or remove an entrepreneur. If you are unsure if your floor asbestos, require a trained asbestos inspector.) If you have tiles on the floor, you can easily add new tiles on top, so long as it is, and not just the surface. You may need to sand the surface, you can get your linka better chance.
Finally, a bit 'of planning and thought go a long way home for the production of the project, tile ON addition to your long-term, so take your time to go "with" Both Guns Blazing.
Related posts: